GAS TURBINE PARTS 

  • Full-cycle capability — engineering, manufacturing, procurement and supply, from technical evaluation and manufacturing documentation through to final inspection, qualification and delivery.
  • Engineering on every component — technical specifications, material requirements, acceptance criteria, drawings, dimensional tolerances, critical-to-quality characteristics, and inspection and test plans.
  • Controlled production — recognised standards and approved procedures, verified through material, dimensional, metallurgical, Non-Destructive Testing (NDT), coating, balancing and functional inspection.
  • Complete documentation — every order is delivered with a full manufacturing dossier: drawings, certificates, procedures, test reports and traceability records.

What We Supply

Hot Gas Path Components

Blades, vanes, nozzles, shrouds and transition pieces for the turbine section.

Compressor Components

Rotating and stationary blading, vane carriers and diaphragms.

Bearings

Journal, thrust and tilting-pad bearings, housings and pads.

Fuel System

Valves, manifolds, flow dividers, check valves and fuel piping.

Auxiliary Systems

Lube oil, hydraulic, cooling, starting and enclosure components.

Combustion System

Liners, baskets, fuel nozzles, crossfire tubes and igniters.

Rotor Parts

Discs, shafts, spacers, tie bolts and coupling components.

Seals

Labyrinth, brush and carbon seals, seal rings and sealing components.

Filtration

Inlet air, lube oil, fuel and hydraulic filtration elements and assemblies.

Instrumentation & Consumables

Thermocouples, vibration probes, gaskets, fasteners and maintenance kits.

Siemens Energy

SGT-100

5 MW

SGT-200

7 MW

SGT-400

13 MW

SGT-600

24 MW

SGT-700

33 MW

SGT-800

62 MW

SGT-A05

4-7 MW

V94.2

160 MW

GE Gas Power

Frame 5

26 MW

Frame 6B

44 MW

Frame 9E

130 MW

LM2500

25 MW

Solar Turbines

Saturn

1.2 MW

Centaur

3.5–4.6 MW

Taurus

6–7.7 MW

Mars

9-11 MW

Titan

13–22 MW

Engineering, manufacturing and quality control

 

Every component follows the same three-stage route.

01

Engineering

Specification, material requirements, acceptance criteria, drawings, tolerances and the inspection and test plan.

 

02

Manufacturing

Material, dimensional, metallurgical, NDT, coating, balancing and functional inspection to approved procedures.

 

03

Documentation

Full dossier: drawings, certificates, procedures, test reports and traceability records.